Conference Room Design

A conference room can be an incubator for the next great idea. When meeting room design isn’t fully thought through, however, great ideas can fizzle out and go nowhere. So how do you design a conference room to have the best impact possible?

Designing or redesigning a conference room isn’t as simple as it may seem. You can create a rectangular room with a large table in the center, but it can be far more challenging to design a meeting room that meets your company’s needs and even tougher one that works well.

Here are some common mistakes to conference room design as well as some suggestions for remedying them:

Wrong Screen Size – A conference room is no longer just a place for physical meetings; it has to be a good space for virtual meetings, too. The video screen is a central part of meeting room design, and it must be just right for the space. Think of where everyone will be in the room, and make sure no one has to strain their necks to see the screen. At the same time, the screen shouldn’t dominate the room.

The best screen size is one that allows the image to be large enough so that those in the back of the room can read the text, but not so big that it overpowers the people sitting in the front. As a general rule, the screen height should be three to six times the distance between the furthest seat and the screen. So, if the furthest seat is eighteen feet from the screen, the screen should be at least three to six feet high. It should also be considered that your screen can now double as a digital white board for meeting notes and collaboration.

Incorporating technology no one knows how to use. There is often a disconnect between the tech staff and everyone else at a company. It can be easy to be talked into buying complex AV equipment that only a couple of staff members know how to use. This can cause issues for you and your team if those trained employees aren’t available for an important call or meeting. Make sure the technology incorporated into the meeting room design is relatively intuitive to use, and that there are people in every department who are well trained in how to use it.

One strategy to keep everyone up on the technology in the conference room is to train team leaders first, and then have them train others in their divisions. Other helpful tips,  include hands-on training and online training.

Not enough space or too much space for the headcount – Make sure you have a firm and realistic figure for how many people on average attend conference meetings, and plan to accommodate a few more people than that. Too little space and people are bumping elbows and getting annoyed; too much and it feels intimidating. Keep in mind that your future needs may change, especially if you’re anticipating growing your headcount.

Measure your conference room and determine how much clearance space you need from the walls and any other obstructions, and then estimate your number of users. Next comes the fun of deciding the shape and dimensions of the table.

Overpowering Lighting – Harsh lighting can drain the energy out of a room and and make people irritable. When choosing lighting options, think of what the light is like in your favorite spaces. Like the way that library room looks, or maybe you just love the mood in that bistro down the street? Find what you like and then ask the designer or business owner what they installed. Also, be sure to consider how the room’s lighting might interact with natural lighting throughout the year.

Put in a variety of light sources, like task lighting and floor and desk lamps, and dimmer switches so that your workers can control the level and quality of light.

No space for storage – A clean, well-stocked conference room with plenty of storage can help your meetings to run smoothly. There will be enough space for all of the peripherals that you need, and by having everything stored in cabinets and closets, you’ll keep a clean and pleasing aesthetic. A natural placement for no-hassle storage is below the conference room screen, but to use this space well, you’re going to need more than just the clunky shelving unit.

No Thought To Placement – Sometimes, it’s not so much the conference room design that’s the problem; it could be where the conference room is located in the office floor plan. Think about how and when your employees use the meeting room. Does anything about your usage patterns give you ideas of where the office should be located? Be sure to allow convenient access to the room, and place it where there won’t be too many distractions.

Thinking it must be the only meeting room – Designing a conference room that can accommodate both big and small groups can be difficult. The solution? Don’t try. One solution to consider is building micro-meeting rooms for small groups, leaving the larger main conference room for big meetings.

Emphasizes the need to create ad hoc spaces that don’t need to be scheduled for quick sideline discussions on projects. Most of these spaces can be created with a quick trip to IKEA, if needed. We also suggest installing old-fashioned phone booths for making quick, private calls in the office, if you want to get fancy.

Unsuitable Furniture – There is an art to picking out furniture for meeting room design. The best furniture options also should be adjustable, as it is fairly unlikely that everyone working at your company is the same height or has the same back health. Enlist a few “test sitters” from your company when evaluating chairs. This will not only help you figure out what is important, but it will also help make sure everyone is happy with the selection

Forgetting the Fun. It’s a mistake to make your conference room design too stoic. Remember that this is a place for creativity and try and incorporate some amount of playfulness or creativity into the design, even if it’s just a mural.

There is no one solution to conference room design, so give the project some thought, and seek professional consultation if you have questions. The process of designing your meeting room might even shed light on your company’s character. Also, if any of this feels overwhelming, just start with one. You don’t need to do everything all at once.

For a professional conference room quote contact XS Applied Technologies for more information 732-272-0022

1 thought on “Conference Room Design”

  1. I have been researching this subject for about two weeks now and this is actually the 1st write-up that truly makes perfect sense. How come it’s so hard to find good specifics about protection today? Surely value the effort you invested getting your thoughts into words so novices such as me can certainly take a step. Will there be a part two for your post? Thanks again!

Leave a Reply

Your email address will not be published. Required fields are marked *